The first 40-degree day of summer arrives, the house stays hot long after sunset, and the fan just pushes warm air around the room. That is the moment air conditioning stops being a nice-to-have and becomes the job that has to happen before the next heatwave.
Then the quotes arrive, and they seem to describe different jobs. One installer quotes $1,800 for a split system, another quotes $5,000, and neither explains what the money actually covers.
This guide breaks down the air conditioning installation cost Australia homeowners face, system by system, with the unit price and the installation price kept separate so you can see exactly where the money goes.
It covers the four system types, the factors that push the price up, what installation alone costs, and how to get a fair quote from a licensed installer.
Air conditioning installation cost Australia: the 2026 figures
A single split system is the cheapest way in, at $1,500 to $5,000 or more for supply and installation, according to hipages. A multi-split system that cools several rooms usually lands between $3,000 and $10,000.
Ducted air conditioning, which covers the whole home, starts at $6,000 for a small home and can reach $30,000 for a large one, with a typical one-storey home around $14,000. Those are hipages’ 2026 figures, and they are indicative — the final price depends on the system, the size of the home and how complex the install is.
SolarQuotes’ 2026 research puts the same systems in narrower ranges that start higher. Its figures are $1,800 to $4,800 for a single split system, $4,200 to $8,000 for a multi-split, and $12,000 to $17,000 for ducted, with complex ducted jobs passing $20,000. The two sources agree on the order — split cheapest, ducted dearest — and differ on both the floor and the top of each range.
What each system costs
Split system
Split systems are the most popular air conditioning choice in Australia, and the cheapest way into proper cooling. A wall-mounted indoor unit connects to an outdoor unit through pipes in the wall, and one system cools one room. Most split systems are reverse-cycle, so they heat as well as cool — which is why so many Melbourne homes have switched from gas heating to reverse-cycle systems.
hipages puts a split-system unit at $600 for a budget model to $5,000 for a premium one, with installation adding $600 to $1,500 depending on complexity and the installer’s hourly rate. The total usually lands between $1,500 and $5,000 or more. SolarQuotes’ 2026 figure is $1,800 to $4,800 for supply and installation, of which $1,000 to $1,200 is the installation alone.

- Total, supply and installation (hipages) — $1,500 to $5,000 or more
- Unit only (hipages) — $600 for a budget model to $5,000 for a premium one
- Installation only (hipages) — $600 to $1,500 extra
- By size (Tempco, supply and standard installation) — 2.5 kW about $1,500 to $2,500 · 5 kW about $1,800 to $3,500 · 7 kW about $2,200 to $4,800
- Best for — one room, a small home or an apartment
Multi-split
A multi-split system runs several indoor units from one outdoor unit, so it can heat or cool multiple rooms without a separate outdoor box for each one. It suits homes where two or three rooms need cooling but ducted is more than the budget allows.
hipages puts the total at $3,000 to $10,000, with each wall unit costing $600 to $5,000 before installation. SolarQuotes’ 2026 range is tighter at $4,200 to $8,000, with a top-tier two-head system starting at $4,200 to $4,500 and each extra head adding $1,000 to $1,500. Tempco splits it by heads — about $4,200 to $5,500 for two heads and $5,500 to $8,000 for three or four.

- Best for — two to four rooms cooled from a single outdoor unit
- Watch out — the price climbs with every extra head, and a large home can make ducted the better buy
- Per extra head (SolarQuotes) — $1,000 to $1,500 added to the total
- Space saved — one outdoor unit instead of one per room
Ducted
Ducted air conditioning cools and heats the whole home through one central unit and a network of ceiling vents. There are no wall-mounted units in the rooms, and zones can be switched off where cooling is not needed. It is the most expensive system to install, and the best fit for medium and large homes.
hipages puts a small home or apartment at $6,000 to $10,000, a larger home up to $30,000, and a typical one-storey home around $14,000. SolarQuotes’ 2026 range is $12,000 to $17,000, with complex jobs passing $20,000. Tempco breaks it down by zones — about $10,000 to $14,000 for three or four zones, $14,000 to $18,000 for five or six, and $18,000 to $20,000 or more for a large or complex home.

- What you get — whole-home cooling and heating, zoned room by room
- What it needs — roof space for ducting, a central unit, and the longest install time
- Typical one-storey home (hipages) — around $14,000
- Top end (SolarQuotes) — past $20,000 for complex jobs
Portable
A portable air conditioner needs no installation at all. It stands in the room and vents hot air out a window, which makes it the cheapest option to buy — from $300 according to hipages — but also the least effective. SolarQuotes is blunter, saying portable units don’t actually work in most cases.
Airtasker puts a portable unit from about $310, with setup costing $950 to $2,100 depending on the model and the work required. For most homes, a split system is the better spend if the budget stretches to it.

- If you rent and can’t install anything — a portable unit is the only option that needs no tradie
- If you own the home — a split system cools properly for not much more
- If you only need it for a few hot days a year — a portable unit is cheap to buy, but expect weak cooling
- Noise — portable units are noisier than split systems, and they are often ineffective
What drives the price up
The system type sets the range, but the details of your home set the final figure. Size is the first driver — a bigger room needs a bigger unit, and a bigger home needs more heads or more zones. A second storey, a long pipe run between the indoor and outdoor units, and difficult wall or roof access all add labour and materials.
Brand matters too. Premium brands such as Daikin cost more than budget brands, while cheaper alternatives can cost more later if problems appear.
Extras add up as well — wireless control, a concrete slab for the outdoor unit, and any electrical work such as new cables or a circuit breaker. Remote locations can attract travel fees.
Two things catch people out. A quote that leaves out commissioning and warranty registration is not the full price, so check before signing. And surprise obstacles — insulation problems, tricky wall or ceiling types, outdoor unit placement and site access — can change the price after the quote if the installer did not ask the right questions first.
Installation-only costs
The installation alone — labour, pipework, cabling and commissioning, without the unit — is a smaller slice of the bill, but it varies by city. Airtasker puts average installation labour at $550 to $735, with Sydney the dearest at $640 to $853 and Hobart the cheapest at $481 to $639. Melbourne sits at $602 to $802, Brisbane at $576 to $768, Perth at $544 to $726, Adelaide at $513 to $683 and Canberra at $493 to $657.
Hourly rates tell the same story two ways. hipages puts installer rates at $60 to $110 an hour, rising on public holidays. Airtasker’s average is about $104 an hour.
The two figures come from different sources and different samples, so treat them as two separate readings rather than one settled rate. A back-to-back split install, where both units share the same wall, typically takes $700 to $1,200 of labour according to Tempco.

| System type | Supply + install | Install-only | Best for |
|---|---|---|---|
| Split system | $1,500–$5,000+ (hipages) | $600–$1,500 (hipages) | One room, small home, apartment |
| Multi-split | $3,000–$10,000 (hipages) | Included in the total | Two to four rooms, one outdoor unit |
| Ducted | $6,000–$30,000 (hipages) | Included in the total | Whole home, medium and large homes |
| Portable | From $300, no install (hipages) | None — no installation | Renters, short-term cooling |
SolarQuotes’ 2026 cross-check figures run in narrower ranges that start higher — a single split system $1,800 to $4,800, a multi-split $4,200 to $8,000, and ducted $12,000 to $17,000 — and Airtasker’s unit-plus-install range is $1,430 to $7,420. All figures are indicative and vary locally.

Licensing and safety
Air conditioning installation is licensed work, and it is not a DIY job. Installers must hold a licence with the Australian Refrigeration Council (ARC) — a full licence covers all air conditioning work, while a restricted licence covers split systems only. In New South Wales, the installer also needs an electrical licence and an ARCtick refrigerant handling licence.
DIY installation is illegal under AS/NZS 5149. It poses genuine safety risks and voids the manufacturer warranty. Check the licence before you book, and ask for the licence number if it is not shown on the quote.
How to get a fair quote
Get at least three quotes from qualified installers in your area, and compare them on what they cover rather than the bottom line alone. Ask whether the price includes the unit as well as the installation, or whether you need to buy the unit yourself first. Check local reviews and ask for references.
Before you sign, confirm the quote includes commissioning and warranty registration — a misleading quote can leave these out. And don’t rush the purchase on a hot day. In a heatwave, ducted installs have faced lead times of three weeks, so the best time to book is before summer arrives.

When to replace instead of repair
Air conditioners typically last 10 to 15 years. When the unit stops heating or cooling as well as it used to, leaks water, or starts making unusual sounds, replacement is usually closer than repair.
Replacing a unit usually costs less than the first installation, provided nothing about the setup has changed. The existing electrics and pipes can often be reused, though warranties typically require the piping to be replaced. If you are adding rooms or moving units, expect the price to rise back toward a fresh installation.
Frequently asked questions
Can I install an air conditioner on the second storey of a home?
Ducted air conditioning is the ideal choice if you would like air conditioning on the second storey of your home. Split systems are also possible, and it is recommended to speak to an installation expert.
How much do air conditioning installers charge?
The hourly rate for air conditioning installers depends on what state they are located in and their level of experience. It can range from $60 to $110, with the rate rising on public holidays.
When do you need to replace an air conditioning unit?
Air conditioning units typically need replacing every 10 to 15 years unless you experience faults. These could include poor cooling, leaking of water, unexpected sounds or noisy operation.
Is getting an air conditioner worth it?
Split system air conditioning systems are one of the most cost-effective ways of heating or cooling your home, making them well worth the initial financial outlay.
The bottom line
Air conditioning installation cost Australia wide runs from about $1,500 for a single split system to $30,000 for ducted in a large home, according to hipages, with most households landing somewhere in between. The system type sets the range. The size of your home, the complexity of the install and the brand set the final figure.
Get three quotes, check the ARC licence, and make sure commissioning and warranty registration are in the price before you sign. For help getting the best from the system once it is in, our top heating and cooling tips cover how to keep your home comfortable through the seasons.



